Video procedure

Step by step procedure:

Information

This procedure is valid for blind & shutters radio motors:

• Roller shutters
• Roller blinds
• Venitian blinds
• Awnings
• ...

The following operation must be carried out with individual control point of your roller shutter (remote control or wall-mounted switch).

Open the memory of the motor

WARNING: You have to use a second individual assigned control point. If you use a control point assigned to a group of drives, you’ll delete this group to the new control point.

1. Press and hold the prog button on the back of the control point you want to keep until the shutter moves up and down

Remove the control point from the memory

1. Briefly press the prog button on the back of the control point you want to remove. The shutter makes a brief up and down movement.

2. Press up or down to check the operation

The control point no longer controls motorised product!