Video procedure:

Step by step procedure:

Information:

This procedure is valid for radio motor:

• Oximo io
• Oximo RTS
• Altus RTS

The following operation must be carried out with individual control point of your roller shutter (remote control or wall-mounted switch).

This following operation must becarried out in case of:

• The roller shutter doesn't open completely
• The roller shutter doesn't close completely

WARNING: This process is valid only for motor with end-limits set manually. If not, you should reset the motor.

Adjust the lower end-limit

1. Press down to reach the actual lower end limit

2. Press and hold up and down 5 seconds until the drive moves up and down

3. Press up or down to adjust the position and completely close the shutter

4. Press and hold "my" button 2 seconds until the drive moves up and down

The lower end-limit is set!

Adjust the upper end-limit

1. Press up to reach the actual upper end limit

2. Press and hold up and down 5 seconds until the drive moves up and down

3. Press up or down to adjust the position and completely open the shutter

4. Press and hold "my" button 2 seconds until the drive moves up and down

The upper end-limit is set!