Video procedure:

Step by step procedure:

Information

This procedure is valid for blind & shutters radio motors:

• Roller shutters
• Roller blinds
• Venitian blinds
• Awnings
• ...

The following operation must be carried out with individual control point of your roller shutter (remote control or wall-mounted switch).

Open the memory of the motor

WARNING: We recommend to use an individual assigned control point. If you use a control point assigned to a group of drivers, you will duplicate this group to the new control point.

1. Press and hold 3 seconds the prog button on the back of the already assigned control point until the shutter moves up and down

Add the control point to the memory

1. Briefly press the prog button on the back of your new control point. The shutter makes a brief up and down movement.

2. Press up or down to check the operation

The new control point is paired with the roller shutter and ready to be used!